What is Gelsoft?
Gelsoft, also known as gel ball blasters or gel blasters. From its name, it can be seen that it is similar to Airsoft guns, not only in the name but also in design. It is a type of toy gun that fires small gel-filled projectiles, similar to gelatin balls or beads. They are designed to simulate the experience of playing with firearms, but in a safer and less harmful manner compared to traditional airsoft or paintball guns, it’s an excellent alternative.
The gel balls used in gelsoft guns are typically made of water-absorbent polymers, which are soaked in water before use. When fired from the gel blaster, these balls are soft and upon impact, they burst, releasing a small amount of water. Gelsoft guns usually operate on spring, electric, or gas-powered mechanisms to propel the gel balls.
Why play Gelsoft when there’s Airsoft
Gelsoft guns gained popularity in countries where airsoft and other similar activities may be restricted due to local laws or safety concerns. They provide a less intense alternative for recreational shooting and competitive gameplay. Additionally, gelsoft guns are often used in organized events and skirmishes, where players engage in friendly combat scenarios.
Gelsoft vs Airsoft
Gelsoft and airsoft are both recreational shooting activities that involve using toy guns to simulate combat scenarios, but there are some key differences between them:
Ammunition
In gelsoft, the guns fire small gel balls that are made of water-absorbent polymers. These balls burst upon impact, releasing a small amount of water. In airsoft, the guns typically fire small plastic BBs.
Impact and Safety
Gel balls used in gelsoft guns are softer and less likely to cause injury compared to airsoft BBs. Airsoft BBs can be harder and may cause more discomfort or bruising upon impact. However, both activities require players to wear appropriate protective gear, such as eye protection, to ensure safety.
Range and Accuracy
Airsoft guns generally have a longer range and better accuracy compared to gelsoft guns. Airsoft BBs are smaller and lighter, allowing them to travel farther and maintain a more consistent trajectory. Gel balls are larger and heavier, which can limit their range and accuracy.
Realism
Airsoft guns are often designed to closely resemble real firearms in terms of appearance, weight, and operation. They can have blowback actions, realistic magazines, and similar controls. Gelsoft guns, on the other hand, may have a more futuristic or fictional design and may not strive for the same level of realism.
Legality
The legality of both gelsoft and airsoft can vary depending on the country or region. In some places, airsoft may be more regulated or restricted due to its realistic appearance and potential for misuse. Gelsoft guns are often seen as less realistic and may have fewer legal restrictions.
Overall, the choice between gelsoft and airsoft depends on personal preference, local regulations, and the desired level of realism. Gelsoft offers a softer and less intense experience, while airsoft provides a more realistic and competitive gameplay environment. It’s important to adhere to local laws and safety guidelines when participating in either activity.
How to use Gelsoft?
To use gelsoft guns, follow these general steps:
- Familiarize Yourself with the Gun: Read the instruction manual provided with your gelsoft blaster to understand its features, operation, and safety guidelines. Different gelsoft guns may have specific instructions, so it’s important to follow the manufacturer’s recommendations.
- Prepare the Gel Balls: Gel balls are usually sold in a dry form and need to be hydrated before use. Follow the instructions on the packaging to soak the gel balls in water for the recommended duration. They will absorb water and expand in size. Drain any excess water after soaking.
- Load the Magazine: Most gelsoft blasters have a removable magazine or clip that holds the gel balls. Slide or release the magazine, and fill it with the soaked gel balls. Pay attention to the magazine’s capacity and do not overfill it.
- Insert the Magazine: Insert the loaded magazine back into the gelsoft blasters until it clicks or locks into place securely. Ensure the magazine is properly seated to avoid feeding issues during gameplay.
- Power On the Gun: Depending on the type of gelsoft blasters, you may need to turn on or activate the power source, such as a battery or gas canister. Follow the specific instructions for your gun model.
- Safety Precautions: Before proceeding, put on appropriate safety gear, such as eye protection, to protect yourself and others during gameplay. Safety should always be a priority when using gelsoft guns.
- Ready to Fire: Take a firm grip on the gelsoft gun, keeping your finger off the trigger until you are ready to shoot. Aim at your target, aligning the sights if applicable, and pull the trigger to fire a gel ball.
- Gameplay and Rules: Engage in gelsoft gameplay according to the rules and regulations set for your specific event or location. Respect the boundaries, follow fair play, and practice good sportsmanship.
- After Use: Once you’re done using the gelsoft blaster, remove the magazine, unload any remaining gel balls, and store them in a safe place. Clean and maintain your gelsoft gun as per the manufacturer’s instructions.
Always remember to comply with local laws, regulations, and safety guidelines when using gelsoft guns. It’s essential to use them responsibly and be considerate of others around you.
How to choose the right Gelsoft Blasters?
When choosing the right gelsoft blaster, we recommend to consider the following factors:
- Budget: Determine how much you are willing to spend on a gelsoft gun. Gelsoft guns can range in price from affordable options to higher-end models with more features. Set a budget and look for options within that range.
- Power Source: Gelsoft guns can be spring-powered, electric-powered (AEG), or gas-powered. Each type has its advantages and considerations. Spring-powered guns are typically more affordable but require manual cocking before each shot. AEGs are popular for their semi-automatic or full-automatic capabilities and a higher rate of fire. Gas-powered guns offer realistic blowback action and performance but may require additional maintenance and refilling of gas canisters.
- Purpose: Consider the intended use of the gelsoft gun. Are you looking for a casual backyard plinking gun or do you plan to participate in organized events and competitions? The purpose will help you decide on the type and features you need.
- Style and Design: Consider the aesthetics and design preferences. Gelsoft guns come in various styles, from modern military replicas to futuristic designs. Choose a style that appeals to you and fits the overall look and feel you desire.
- FPS (Feet Per Second): FPS refers to the velocity of the gel balls as they leave the gun’s barrel. Different gelsoft guns have different FPS ratings. Consider your intended use and any FPS restrictions in your local area or event. Higher FPS usually means a longer range but may also require additional safety precautions.
- Magazine Capacity: The magazine capacity determines how many gel balls the gun can hold before needing to be reloaded. Consider your play style and preferences. Higher-capacity magazines offer more shots before reloading, but they can be larger and heavier.
- Upgradability: Some gelsoft blasters have aftermarket upgrade options available, allowing you to customize and improve their performance over time. If you are interested in upgrading or modifying your gun in the future, choose a model with good upgrade compatibility and availability of parts.
Remember to comply with local laws and regulations regarding gelsoft guns in your area.